Trim Include Function - Spektrum DX6I User Manual

SWITCh fUNCTIONS
The Mixes can be turned off and on using one of the following switches.
ON- Always on
F MODE- F switch forward
GYRO- Gyro switch down
AIL D/R- Aileron dual rate switch up
ELE D/R- Elevator dual rate switch up
MIX- Mix switch forward
TO PROGRAM ThE MIX SWITCh
Rotate the roller to highlight SW.
Reduce photo to 13.5%
THRO≥ THRO ACT
RATE D
SW AIL D/R TRIM INH
Press the roller to access the switch selection function.
Rotate the roller to select the desired switch.
After the desired switch is programmed press the roller to deselect the value.
128
MIX 1
List
0% U 0%
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

TRIM INClUDE fUNCTION

Both mixes offer a trim feature that, when activated, cause the master channel's trim to affect the slave channel.
TO PROGRAM ThE TRIM INClUDE fUNCTION
Rotate the roller to highlight TRIM.
THRO≥ THRO ACT
RATE D
SW AIL D/R TRIM ACT
Press the roller to access the trim function.
Rotate the roller to select ACT (activate) or INH (inhibit).
After the trim function is programmed press the roller to deselect the value.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
MIX 1
List
0% U 0%
129