Spektrum DX6I User Manual page 34

SUb-TRIM
The Sub-Trim function allows you to electronically adjust the centering of each servo. Sub trim is individually
adjustable for all six channels, with a range of + or - 100% (+ or - 30 degrees servo travel).
Caution: Do not use excessive sub-trim values as it is possible to overdrive the servo's
maximum travel.
The channels available are:
• THRO: Throttle
• AILE: Aileron
• ELEV: Elevator
• RUDD: Rudder
• GEAR: Retractable Landing Gear
• FLAP: Flap
TO ACCESS ThE SUb-TRIM fUNCTION
With the transmitter already powered on and the main screen displayed, press and release the ROLLER to
enter the ADJUST LIST.
Reduce photo to 13.5%
ADJUST LIST
MODEL SELECT
Rotate the ROLLER to the right until SUB TRIM is highlighted on screen.
Reduce photo to 13.5%
ADJUST LIST
TRAVEL ADJ
SUB TRIM
FLAPS
66
Main
Main
4
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Press the roller to access the SUB TRIM function.
SUB TRIM
THRO
ELEV
GEAR
Rotate the roller to highlight the desired channel's value that you wish to adjust.
Press the roller to access the sub trim value.
Rotate the roller to adjust the sub trim value.
After the desired value is programmed press the roller to deselect the value.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
List
0 AILE 0
0 RUDD 0
0 FLAP 0
67