Model Name; Model Type - Spektrum DX6I User Manual

TO SElECT A MODEl TyPE
Rotate the roller to highlight the desired model type ACRO (airplane) or HELI helicopter then press the roller
to program that model type in model memory. Note that when changing model type all programming from the
previous model will be erased and the new model will be reset to factory default settings.

MODEL TYPE

ACRO
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to the
SETUP LIST screen.
34
Reduce photo to 13.5%
List
HELI
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

MODEl NAME

The Model Name function is used to input and assign the model's name to a specific memory, allowing easy
identification of each model's program. Each model's name is displayed on the main screen when that model is
selected. Up to eight characters that include numbers and letters are available.
TO ENTER ThE MODEl NAME fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.
MODEL TYPE appears on the lower section of the screen.
SETUP LIST
MODEL TYPE
Rotate the roller to highlight MODEL NAME then press the roller to access the MODEL NAME function.
SETUP LIST
MODEL TYPE
MODEL NAME
MONITOR
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
1
Reduce photo to 13.5%
Main
2
35