Travel Adjust; Sub-Trim - Spektrum DX6I User Manual

TRAvEl ADjUST

The Travel Adjust function allows the precise end-point adjustments of all six channels in each direction
independently. The travel adjust range is from 0–125%.
Channels available for programming are:
• THRO: Throttle
• AILE: Aileron
• ELEV: Elevator
• RUDD: Rudder
• GEAR: Retractable Landing Gear
• FLAP: Flap
TO ACCESS ThE TRAvEl ADjUST fUNCTION
With the transmitter already powered on and the main screen displayed, press and release the ROLLER to enter the
ADJUST LIST.
Reduce photo to 13.5%
ADJUST LIST
MODEL SELECT
Rotate the ROLLER to the right until TRAVEL ADJ is highlighted on screen.
Reduce photo to 13.5%
ADJUST LIST
D/R&EXPO
TRAVEL ADJ
SUB TRIM
64
Main
Main
3
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Press the roller to access the TRAVEL ADJ function.
TRAVEL ADJ
THRO+100%
ELEV+100%
GEAR+100%
Move the respective stick or switch in the desired direction that you wish to change the travel adjust.
Rotate the roller to highlight the desired channel's value that you wish to adjust.
Press the roller to access the travel adjust value.
Rotate the roller to adjust the travel adjust value.
After the desired value is programmed press the roller to deselect the value.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
List
AILE+100%
RUDD+100%
FLAP+100%
65