Spektrum DX6I User Manual page 24

D/R COMbI SWITCh ASSIGNMENT
The Dual Rate Combi switch assignment function allows the aileron, elevator and rudder dual rate and exponential
functions to be assigned to one of four common switches such that the dual rates/expos for all three channels can
be accessed using a single switch.
TO ACCESS DUAl RATE COMbI ASSIGNMENT
To access the dual rate combi function rotate the roller to highlight D/R COMBI then press the roller to access the
Dual Rate Combi function.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
Reduce photo to 13.5%
SETUP LIST
WINGTAILMIX
D/R&COMBI
TIMER
46
Main
Main
7
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Rotate the roller to highlight IHN then press the roller. Now rotate the roller to select AILE, ELEV, RUDD or GEAR.
D/R SW:
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to the
SETUP LIST screen.
Note: If INH is selected the aileron, elevator and rudder dual rate and expo functions independently
operate using their respective switches.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
D/R COMBI
List
INH
47