Spektrum DX6I User Manual page 64

Press the roller to access the MIX 1 function.
Reduce photo to 13.5%
THRO≥ THRO ACT
RATE D
SW ON
SElECTING MASTER AND SlAvE ChANNElS
Rotate the roller to highlight the master (left) channel in the screen.
Reduce photo to 13.5%
THRO≥ THRO ACT
RATE D
SW F.MODE
Press the roller to access the master channel selection.
Rotate the roller to select the desired master channel.
• THRO: Throttle
• AILE: Aileron
• ELEV: Elevator
• RUDD: Rudder
• GYRO: Gyro
• PITC: Pitch
126
MIX 1
List
0% U 0%
TRIM INH
MIX 1
List
0% U 0%
TRIM INH
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Press the roller to deselect the master channel then rotate the roller to select the slave channel.
Press the roller to access the slave channel selection.
Rotate the roller to select the desired slave channel.
• THRO: Throttle
• AILE: Aileron
• ELEV: Elevator
• RUDD: Rudder
• GYRO: Gyro
• PITC: Pitch
SElECTING ThE MIXING vAlUES
Rotate the roller to highlight the desired rate and direction.
THRO≥ THRO ACT
RATE D
SW ON
Press the roller to access the rate value.
Using the roller, rotate to adjust the desired mixing values. Note that positive + and negative – values are available
and affect the direction of the slave servo travel.
After the desired value is programmed press the roller to deselect the value.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
MIX 1
List
0% U 0%
TRIM INH
127