Swashplate Mixing - Spektrum DX6I User Manual

Press the roller to access the Pitch Curve function.
PITC CUR
NORM + POS 3
STUNT
HOLD
Rotate the roller to highlight the desired pitch curve that you wish to adjust.
NORM- Normal
STUNT- Stunt mode
HOLD- Hold
Press the roller to access the selected pitch curve.
Rotate the roller to select the pitch curve position that you wish to adjust. Note the graph. The vertical line
represents the selected position that you have chosen. Position options are:
L= Low throttle stick position
2= 25% stick position
3= 50% stick position
4= 75% stick position
H= Full stick position
When selected press the roller to access the pitch value.
PITC CUR
NORM + POS 3
STUNT
HOLD
Rotate the roller to adjust the pitch value at the select stick position.
After the desired value is programmed press the roller to deselect the value.
Repeat this step for all stick positions and all flight modes.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.
122
Reduce photo to 13.5%
List
50.0%
Reduce photo to 13.5%
List
50.0%
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

SWAShPlATE MIXING

The Swashplate Mix screen adjusts the amount and direction of travel for the aileron, elevator and pitch functions.
For example, if more aileron travel is desired, increasing the aileron swashplate mix value will increase the overall
travel of the servos necessary to achieve greater aileron throw. Defaults are set to +60%.
Note: Negative swashplate values are available which will reverse the direction of that function.
Use Servo Reversing (page 87) to change the direction of individual servos in conjunction with
positive or negative swashplate mix values to reverse the direction of all the servos associated with
that function to achieve the correct travel direction of the swashplate.
ACCESSING ThE SWAShPlATE MIX fUNCTION
With the transmitter already powered on and the main screen displayed, press and release the ROLLER to
enter the ADJUST LIST.
ADJUST LIST
MODEL SELECT
Rotate the ROLLER to the right until SWASH MIX is highlighted on screen.
ADJUST LIST
PITC CUR
SWASH MIX
MIX 1
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
Reduce photo to 13.5%
Main
8
123