Copy/Reset; Copy/Reset Screen - Spektrum DX6I User Manual

COPy/RESET

The COPY function allows the current model memory that is being used to be transferred to any of the other 9
available model memories. This is useful when experimenting with different model setups.
The Model Reset function allows the model memory of the current model to be reset to the factory default setting.
TO ENTER ThE COPy/RESET fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Reduce photo to 13.5%
SETUP LIST
CONTRAST
COPY/RESET
ADJUST LIST
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.
SETUP lIST SCREEN
Rotate the roller to highlight COPY/RESET then press the roller to access the COPY/RESET function.
Reduce photo to 13.5%
MODEL 1 BLADE400
COPY TO 1
SURE?
102
Main
12
COPY
List
NO/YES
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

COPy/RESET SCREEN

TO ACCESS ThE COPy fUNCTION
Rotate the roller to highlight COPY then press the roller to enter the COPY function.
COPY/RESET
MODEL 1 BLADE400
COPY
RESET
COPy SCREEN
Rotate the roller to COPY and select the model memory that you wish to copy by pressing the roller then
rotating the roller.
When the desired model memory is selected press and rotate the roller to highlight YES next to SURE and then
press the roller to copy the model to the selected memory.
Note: Be aware that the model you copy to will have its memory replaced with the new model's
memory, and the programming information for the model to be copied to will be erased.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system
to the SETUP LIST screen.
TO PERfORM A RESET
Press the ROLLER and hold while turning on the transmitter to enter the SETUP LIST. When SETUP LIST appears
on screen release the roller.
MODEL 1 BLADE400
SURE?
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
List
Reduce photo to 13.5%
RESET
List
NO/YES
103