Modelmatch; Dual Rate And Exponential - Spektrum DX6I User Manual

Press the roller to access the Model Select function.
Reduce photo to 13.5%
MODEL SELECT
Rotate the roller to display the desired model that you wish to select. Ten models are available.
When the desired model is displayed press the roller to select the displayed model memory. DOWNLOAD... will
appear for several seconds and the transmitter will beep indicating the model has been changed.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Alternatively highlighting MAIN with the roller and pressing the roller will return to the MAIN screen.
Turning the transmitter off then back on will also return to the main screen.

MODElMATCh

The DX6i features patented ModelMatch ™ technology that prevents operating a model using the wrong memory.
This feature can prevent stripped servo gears, broken linkages and even a crash due to trying to operate/ fly a
model using the wrong memory.
hOW MODElMATCh WORKS
Each individual model memory has its own embedded code that is transferred to the receiver during binding. The
receiver actually learns the code for the specific model memory that has been selected during binding and, when
bound, will only operate when that model memory is selected. If a different (non-matching) model memory is
selected, the receiver simply won't connect. This feature prevents trying to operate/ fly a model using the wrong
model memory. The receiver can be re-programmed to operate with any other model memory by simply re-binding
with the transmitter programmed to the desired model memory.
Note: If the receiver is turned on and the matching model memory is not selected, the system will
not connect. Either select the matching model memory or rebind the receiver in the current model
memory to resume operation.
108
List
MODEL 1
BLADE 400
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE

DUAl RATE AND EXPONENTIAl

The Dual Rate and Exponential function allows two control rates to be programmed and selected with a switch.
Dual rates and Expos are available on the aileron, elevator and rudder channels. Changing the dual rate value not
only affects the maximum control authority but also affects the overall sensitivity of control. A higher rate yields a
higher overall sensitivity. The sensitivity around center can be tailored using the Exponential function to precisely
adjust control feel.
Dual and Expo rates can be controlled by their respective dual rate switches (aileron, elevator and rudder) or by 1
common switch (Aileron D/R, Elevator D/R, Rudder D/R or the Gear switch). See COMBI SWITCH screen on page
93 for detail on combining the Dual rate switches.
Dual rate values are adjustable from 0–100%. The factory default settings for both the 0 and 1 switch positions
are 100%. Exponential values are adjustable from -100% to +100% with a factory default of 0% or inhibit. Either
switch position may be selected as the low or high rate by placing the switch in the desired position and adjusting
the value accordingly.
Note: A negative (-) Expo value will increase sensitivity around neutral, and a positive (+) Expo
value will decrease sensitivity around neutral. Normally a positive value is used to desensitize
control response around neutral.
TO ADjUST ThE DUAl AND EXPO RATES
With the transmitter already powered on and the main screen displayed, press and release the ROLLER to
enter the ADJUST LIST.
ADJUST LIST
MODEL SELECT
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
109