Spektrum DX6I User Manual page 45

TO REvERSE A ChANNEl
Rotate the roller to highlight the desired channel then press the roller to select that channel.
Reduce photo to 13.5%
REVERSE
THRO-N
ELEV-N
GYRO-N
With the desired channel selected rotate the roller to select (N=Normal, R+Reverse).
• THRO: Throttle
• AILE: Aileron
• ELEV: Elevator
• RUDD: Rudder
• GYRO: Gyro
• PITC: Pitch
When the reverse direction is selected press the roller to deselect the channel.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system
to the SETUP LIST screen.
88
List
AILE-N
RUDD-N
PITC-N
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
SWASh TyPE
The DX6i offers 2 swashplate types:
One Servo: 90 degrees (standard mechanical mix)
Three Servo: CCPM 120 degrees
Select the swashplate type to match your helicopter.
TO SElECT ThE SWAShPlATE TyPE
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.
ADJUST LIST
MODEL SELECT
Rotate the roller to highlight SWASH TYPE then press the roller to access the swashplate type function.
ADJUST LIST
REVERSE
SWASH TYPE
THRO CUT
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
Reduce photo to 13.5%
Main
5
89