Cc Fixed; Cc Internal - Native Instruments AUDIO KONTROL 1 Operation Manual

►
CC Fixed: Sends a MIDI Control Change message. Two dropdown menus specify the
message's Controller Number and the Controller Value to be set. This can be used,
for example, to switch an effect or any other status on or off, e.g. by sending
CC value 127 upon a hardware press event, and CC value 0 when the button
is released again.
►
CC Internal: Sends a MIDI Control Change message. A dropdown menu specifies the
message's Controller Number. Three additional value fields specify the step size (it
can be negative), and the minimum and maximum values that the controller can
use; higher or lower values are cut. This can be used to change a controller
value continuously, e.g. the modulation wheel, or an effect's depth.
If you change the controller value in the target application by another means
(with the mouse for example), the target application will not communicate
this to the Mapping Application. A subsequent CC Internal message trig-
gered with AUDIO KONTROL 1 might therefore cause a sudden jump of
the controller value!
AUDIO KONTROL 1 – 96