Use Cases; Recording Vocals - Native Instruments AUDIO KONTROL 1 Operation Manual

6. Use Cases

We will assume here that you have already read (and understood) the previous sec-
tions (Parts of the Product, Setup and Quickstarts). If you are an advanced user,
you don't necessarily need to have read all these previous sections carefully, but
we think that it's always a good idea to spend a few minutes on the basics (and if
you are an advanced user, it shouldn't take you too much time to read). Moreover,
the quickstarts also show you how to start using the AUDIO KONTROL 1's Remote
Control, and we will start here from that point. If you feel unsure about anything,
don't hesitate to get back to the previous sections, or to look in the Reference
Section later in this manual.

6.1. Recording Vocals

The first use case that we will look at is recording a voice. AUDIO KONTROL 1's audio
interface allows you to make high quality voice recordings, assuming of course that
you have a microphone that is good enough to achieve this... AUDIO KONTROL 1
comes with enough connections to set up an efficient voice-recording configura-
tion. Actually we will implement here something similar to the setup depicted in
the section 4.1.1, but without the MIDI part (master keyboard...).
AUDIO KONTROL 1 – 49