The Mapping Application; The Application Menu Bar; File Menu - Native Instruments AUDIO KONTROL 1 Operation Manual

7.4. The Mapping Application

The Mapping Application is the control tower of your AUDIO KONTROL 1's remote
control system. It stores the links between hardware actions (what you do on
AUDIO KONTROL 1 top panel) and software events (what you want to be done
within a specific piece of software). Here we will systematically describe all ele-
ments of the Mapping Application user interface that controls and organizes the
formerly explained hardware and software actions/events and other Layers.
Of course, we strongly recommend that you try each element on your Mapping
Application as we describe it in the manual. Learning-by-doing-by-manual-reading
is the key to success!
The Mapping Application offers two view modes: the Display View and the Assign
View. Both share the Application Control Bar at the top of the window. Let us look at
each of them thoroughly.

7.4.1. The Application Menu Bar

The Mapping Application menu bar contains three menus: the File menu, the
Monitoring menu and the Help menu.

File Menu

The File menu allows you to manage the Controller Pages, to access the Driver
Control Panel and to quit the Mapping Application. The menu contains the fol-
lowing entries:
►
New Page: Loads the file "New.xml" that is found within the Factory Pages
folder. If the Page was changed after the last save, a warning dialog asks for
confirmation as all unsaved data will be lost by executing this command.
AUDIO KONTROL 1 – 84