Monitoring Through Your Recording Software - Native Instruments AUDIO KONTROL 1 Operation Manual

Monitoring Through Your Recording Software

When monitoring via your recording software, the input signal is mixed in with the
audio playback. This way, you can adjust the monitoring level/panning of your input
signal from within the Mixer, and you can directly apply EQ and/or effects to the
monitoring signal, just like any other project track. The potential issue with this
type of monitoring is that the monitoring signal will be delayed according to the
input latency value of AUDIO KONTROL 1. Depending on the CPU power of your
system, it might become problematic in some situations.
To enable the voice track monitoring, you need to activate its Monitor button, on the
Mixer, in the main project window or in the track's Inspector:
Note that Cubase® LE, like many other modern recording-capable types of software,
can handle very complex recording setups with different busses/mixes/settings
covering numerous recording issues. Here we show a very simple example of a
recording setup, as we cannot explain in a few lines what a recording software's
manual describes in dozens of pages. For an in-depth explanation of what you can
do with your recording software, please refer to its operation manual.
Cubase® LE also provides you with automatic monitoring options. For more info,
please refer again to the Cubase® LE manual.
AUDIO KONTROL 1 – 53