De-Registering Handsets; Locating A Handset ("Paging"); Listening In To An External Call (Conference) - Gigaset E260 Manual

Using multiple handsets
The registration process is cancelled
after 60 seconds. If the handset has
not registered within this time,
repeat the process.
1) On the handset
¤ q Settings ¤
§Menu§
¤ q Handset ¤
¤ q Register HS ¤
¤ Enter the base system PIN
(default setting: 0000) ¤
Registering flashes on the display.
2) On the base
Within 60 seconds of entering the
system PIN, press and hold the
registration/paging key on the
base (¢ page 1) (min. 3 seconds).
Registering other handsets
You can register other Gigaset hand-
sets and handsets for other devices
with GAP functionality as follows.
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/
paging key on the base
(¢ page 1) for
approx. 3 seconds.

De-registering handsets

You can de-register any other regis-
tered handset from any registered
Gigaset handset.
36
§OK§
§OK§
§OK§
§OK§
¤ q Settings ¤
§Menu§
¤ q Handset ¤
¤ q De-register HS ¤
q
Select the internal party/
parties you wish to de-reg-
ister and press
(The handset you are cur-
rently using is indicated
by <.)
~
Enter the current system
PIN and press
Locating a handset
("paging")
You can locate your handset using
the base.
¤ Briefly press the registration/pag-
ing key on the base (¢ page 1).
¤ All handsets will ring at the same
time ("paging"), even if the ringer
melodies are switched off.
Ending paging
Briefly press the registration/paging
key on the base (¢ page 1) or press
the talk key c or end call key a on
the handset.
Listening in to an
external call (conference)
You want to listen in to an existing
external call.
Prerequisite: The Listening in func-
tion must be activated.
§OK§
§OK§
§OK§
§OK§
.
§OK§
.