Registering Handsets; De-Registering Handsets; Locating Handsets (Paging); Register Hs - Gigaset A530 Manual

Gigaset A530/A530 DUO / CHN en/ A31008-M2541-Y101-1-5D19 / Handset.fm / 23.04.2014
Using the handset

Registering handsets

Manual registration of the Gigaset
A530H on a Gigaset A530
If you want to register additional handsets.
you must activate manual registration of the
handset (1) on both the handset (2) and the
base.
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g. INT 1. If not, repeat
the procedure.
On the handset
If the handset is not registered to a base:
¢
§§MENU§§
§OK§
On the base
Within 60 seconds, press and hold the regis-
tration/paging key for approx. 5 seconds.
On the handset
~
A message indicates that the system is
searching for a base that is ready for registra-
tion.
Please note
If four handsets are already registered,
no additional handset can be registered
to the base. If the 5th handset intends to
register to the base, an error tone is out-
put and the display shows MEMORY
FULL!.

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset A530H
handset.
¢
§§MENU§§
16
¢
SETTINGS

REGISTER HS

Press the display key to start the
registration.
Enter the current system PIN
(default: 0000) and press
¢
SETTINGS

DE-REGISTER

s
~
§OK§

Locating handsets (paging)

From the base
You can locate your handsets using the base.
Briefly press the key on the base
¢
( page 3).
All called handsets will ring simultaneously
(paging), even if the ringtones are deacti-
vated.
Ending paging
Press the key again on the base (
From the handset
You can locate another handset using your
handset.
u
q
§OK§
.
§OK§
All called handsets will ring simultaneously
(paging), even if the ringtones are deacti-
vated.
Ending paging
Ý
Please note
In the case of an incoming external call
the paging is stopped.
Select the internal subscriber
you wish to deregister and press
§OK§
.
Enter the current system PIN
§OK§
and press .
Press the display key to confirm
the action.
¢
Briefly press the INT key (control
key on the left).
Use the control key to select the
handset to be called or select
CALL ALL to locate all registered
handsets.
Press the display key to start
paging.
Press the display key to stop
paging.
page 3).