Setting Up The Answering Machine - Gigaset C285 Manual

Controlling playback
During message playback:
§Menu§
Press the display key to enter
the Options menu.
u
Repeat
Repeat playback of the current message.
On the base station: Press
u
Next / Previous
Jump to playback of the following or pre-
vious message.
On the base station: Press
following message.Press
to the previous message.
u
Delete
Delete the current message.
On the base station: Press the
Deleting messages
You can delete old messages all at once or
individually.
Deleting all old messages
On the handset:
¢
§Menu§
Answer Machine
¢
Delete Old Msgs
¤
Confirm question Delete? by pressing
§OK§
.
õ
On the base station in idle status: Press and hold
the key.
If you have no old messages, you will hear an
error tone and No Messages will be dis-
played on the screen.
Deleting individual old messages
During playback:
¢
§Menu§
Delete
¤
§OK§
Press to delete the current message.
õ
On the base station:
Press the key during playback.
24
§Prev.§
.
§Skip§
to jump to the
§Prev.§
twice to jump
õ
key.
¢
Line 1 / Line 2
Picking up a call from the
answering machine
You can pick up a call while the answering
machine is recording a message or being
operated remotely:
c
Press the Talk key.
Recording stops and you can speak to the
caller.
If two seconds of the call have already been
recorded when you pick it up, the call will be
displayed as a new message.
You can accept the call on every handset. If
you use call screening on a handset, only this
handset can answer up the call.
Setting up the answering
machine
The answering machine is preconfigured at
the factory. Change individual settings using
the handset or the corresponding keys of
the base station.
Activating/deactivating call
screening
While a caller is recording a message, you
can listen through the loudspeakers of regis-
tered handsets and the base station.
¢
§Menu§
Answer Machine
¢
Call Screening
If you use the handset for this setting:
Base / Handset
Select this if you want to make
the setting for the handset or
the base station.
On / Off Press the
firm your selection.
The default setting for the base station is On;
the default setting for the handset is Off.
For call screening on the handset:
§Screen§
Press the display key to start call
screening.
¢
Settings
§OK§
display key to con-