Conference Call - Gigaset S44 User Manual

To end an enquiry call/toggling:
either ...
v
s
End
or ...
a

Conference call

Requirement: You have established an enquiry call (page 30 or page 31).
There is both an active call (the one established with an enquiry call) and a held call (the
first). In a conference call you can speak to both of the other parties at the same time.
You can establish a conference call with
i
two external subscribers or
◆
one internal subscriber and one external subscriber.
◆
It is possible to conduct two conference calls at the same time on one base station.
Establishing a conference call
You are making an enquiry call. The first subscriber is put on hold.
Press the display key to establish a conference call.
CONF.
Ending a conference call
You have several options for ending a conference call:
either ...
a
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
INDIV.
To end the call that is currently active:
Open menu.
Select and confirm. You return to the waiting sub-
OK
scriber.
Press the end call key.
The active connection is ended. You will automati-
cally be called back by the person on hold.
You end the conference:
Hold down (return to idle status).
You change the conference to an enquiry call:
Press the display key to change the conference call to
an enquiry call (page 30 or page 31).
The connection that was active immediately before
the conference call was established becomes the
active call again.
Functions during a call
33