Pnp/Pci Configuration Option - MATSONIC MS7177C User Manual

PNP/PCI Configuration Option

This option displays a table of items that configures how PnP (Plug
and Play) and PCI expansion cards operate in your system. Both
the ISA and PCI buses on the Mainboard use system IRQs (Inter-
rupt ReQuests) and DMAs (Direct Memory Access). You must set
up the IRQ and DMA assignments correctly through the PnP/PCI
Configurations Setup utility; otherwise, the mainboard will not work
properly. Selecting PnP/PCI Configurations on the main program
screen displays this menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled by
x IRQ Resources
x DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
: Move Enter : Select
Help F5:Previous Values
PNP OS Installed
Setting this option to Yes allows the PnP OS (instead of BIOS) to as-
sign the system resources such as IRQ and I/O address to the ISA PnP
device. The default setting is No.
Reset Configuration Data
If you enable this item and restart the system, any Plug and Play con-
figuration data stored in the BIOS setup is cleared from memory. New
updated data is created.
PnP/PCI Configurations
No
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
Auto
Auto
Auto
Auto
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
64
Item Help
Menu Level
Select Yes if you are
using a Plug and Play
capable operating
system. Select No if
you need the BIOS to
configure non-boot
devices.
F1:General
F7:Optimized Defaults
Default: No
Default: Disabled