MATSONIC MS7177C User Manual page 59

AGP Driving Value
When the previous item AGP Driving Control is set to Manual, you can
use this item to set the AGP current driving value.
AGP Fast Write
This item allows you to enable or disable the caching of display data for
the video memory of the processor. Enabling can greatly improve the
display speed. If your graphics display card does not support this fea-
ture, you need to disable this item.
OnChip USB
This should be enabled if your system has a USB installed on the sys-
tem board and you wish to use it.
USB Keyboard Support
Enable this item if you plan to use a keyboard connected through the
USB port in a legacy operating system (such as DOS) that does not
support Plug and Play.
OnChip Sound
When set to Disabled, the onboard audio chip is turned off.
OnChip Modem
This should be enabled if your system has LAN installed on the system
board and you wish to use it.
CPU to PCI Write Buffer
When enabled, up to four words of data can be written to the PCI bus
without interrupting the CPU. When disabled, a write buffer is not used
and the CPU read cycle will not be completed until the PCI bus signals
that it is ready to receive the data. The default setting is Enabled.
PCI Dynamic Bursting
When set to Enabled, every write transaction goes to the write buffer.
Burstable transactions then "burst" on the PCI bus and nonburstable
transaction do not.
PCI Master 0 WS Write
When set to Enabled, writes to the PCI bus are executed with zero wait
states.
Default: DA
Default: Disabled
Default: Enabled
Default: Disabled
Default: Auto
Default: Auto
Default: Enabled
Default: Enabled
Default: Enabled
53