Standard Cmos Setup Option - MATSONIC MS7177C User Manual

8. In the "File Name to Program" dialog box, type in the file-
name of the new BIOS and follow the onscreen
directions to flash the new BIOS to the mainboard.
9. When the installation is complete, remove the floppy
diskette from the diskette drive and restart your computer.
If your mainboard has a Flash BIOS jumper, reset the
jumper to protect the newly installed BIOS from being
overwritten.

Standard CMOS Setup Option

This option displays a table of items defining basic information
about your system.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
Drive B
Floppy 3 mode Support
Video
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter : Select
F5:Previous Values
Date and Time
The Date and Time items show the current date and time held by your
computer. If you are running a Windows OS, these items are automati-
cally updated whenever you make changes to the Windows Date and
Time Properties utility.
IDE Devices
Your computer has two IDE channels (Primary and Secondary) and
each channel can be installed with one or two devices (Master and
Slave). Use these items to configure each device on the IDE channel.
Press <Enter> to display the IDE sub-menu:
Tue, Feb 15 20000
12 : 8 : 59
Menu Level
Press Enter None
Press Enter None
Change the day, month,
Press Enter None
year and century.
Press Enter None
1.44M, 3.5 in.
None
Disabled
EGA/VGA
All Errors
640K
63488
64512K
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
44
Item Help
F1:General Help
Default: None