MATSONIC MS7177C User Manual page 68

Wake Up Events
This item opens a submenu that enables you to set events that will re-
sume the system from a power saving mode. Select Wake Up Events
and press Enter to display the following menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
USB Resume from S3/S4/S5
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn by PCI Card
Wake Up On LAN/Ring
RTC Alarm Resume
x Date (of Month)
x Resume Time (hh:mm:ss)
Primary INTR
IRQs Activity Monitoring
: Move Enter : Select
F5:Previous Values
USB Resume from S3/S4/S5
Use this item to enable USB activity to wakeup the system from a pow-
er saving mode.
VGA
When set to On, the system power will resume the system from a pow-
er saving mode if there is any VGA activity. Default is Off.
LPT & COM
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the serial ports, or the
parallel port.
HDD & FDD
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the hard disk drive or
the floppy diskette drive.
PCI Master
When set to Off any PCI device with Master function will not power on
the system.
Wake Up Events
Disabled
OFF
LPT/COM
ON
OFF
Disabled
Disabled
Disabled
0
0 0 0
ON
Press Enter
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
Default: LPT/COM
62
Item Help
Menu Level
F1:General Help
Default: Disabled
Default: Off
Default: ON
Default: Off