MATSONIC MS7177C User Manual page 69

PowerOn by PCI Card
Use this item to enable PCI activity to wakeup the system from a power
saving mode.
Wake Up On LAN/Ring
Use this item to enable LAN or modem activity to wakeup the system
from a power saving mode.
RTC Alarm Resume
When set to Enabled, the following two fields become available and you
can set the date (day of the month), hour, minute and second to turn on
your system. When set to 0 (zero) for the day of the month, the alarm
will power on your system every day at the specified time.
Primary INTR
Set Primary INTR to ON to allow you to enable or disable IRQ 3
through IRQ 15 activity monitoring. Set it to OFF to disable IRQ activity
monitoring.
IRQs Activity Monitoring
This item opens a submenu that enables you to set IRQs that will re-
sume the system from a power saving mode. Select IRQs Activity
Monitoring and press <Enter> to display the following menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQs Activity Monitoring
IRQ 3 (COM2)
IRQ 4 (COM1)
IRQ 5 (LPT2)
IRQ 6 (Floppy Disk)
IRQ 7 (LPT1)
IRQ 8 (RTC Alarm)
IRQ 9 (IRQ2 Redir)
IRQ 10 (Reserved)
IRQ 11 (Reserved)
IRQ 12 (PS/2 Mouse)
IRQ 13 (Coprocessor)
IRQ 14 (Hard Disk)
IRQ 15 (Reserved)
: Move Enter : Select
F5:Previous Values
Set any IRQ to Enabled to allow activity at the IRQ to wake up the sys-
tem from a power saving mode.
Enabled
Enabled
Enabled
Menu Level
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
63
Default: Disabled
Default: Disabled
Default: Disabled
Default: ON
Item Help
F1:General Help