Quick Jumper Setting Reference
If you are familiar with most of the material in this chapter, you
can prepare the mainboard for installation by using this quick
reference to set the jumpers. A detailed description of the jum-
per setting appears later in this chapter.
JP1: Clear CMOS jumper
Use this jumper to clear the contents of the CMOS memory.
Function
Normal operation
Clear CMOS
JP5: Suspend to RAM support enable/disable jumper
Use this jumper to enable or disable the Suspend to RAM (STR)
Function. You must also enable this function in the BIOS Setup
Utility. Refer to Chapter 3.
Function
Enable
Disable
JP6: USB1 wake up jumper
Use this jumper to enable a signal to the USB ports (located on the
I/O port panel) to wake up the system from power saving mode.
Function
Disable
Enable
Jumper Setting
Short pins 1-2
1
Short pins 2-3
Jumper Setting
Short pins 1-2
1
Short pins 2-3
Jumper Setting
Short pins 1-2
1
Short pins 2-3
8
JP1
2
3
JP5
2
3
JP6
2
3