MATSONIC MS7177C User Manual page 42

SIR1: Infrared Port
This mainboard can support a Serial Infrared (SIR) data port. In-
frared ports allow the wireless exchange of information between
your computer and similarly equipped devices such as printers,
laptops, Personal Digital Assistants (PDA), and other desktop
computers.
USB2: USB ports 3/4 connector
Some cases come with USB ports on the front panel. If your
case has these ports, you can connect them to the USB2 con-
nector.
WOM1: Wake On Modem
If you have installed a fax/modem card, you can use the cable
provided with the card to plug into the WOM1 connector on the
mainboard. This is the Wake On Modem feature. When your
system is in a power–saving mode, any incoming calls to the
modem automatically resume the system. You must enable this
item using the Power Management page of the setup utility. See
Chapter 3 for more information.
WOL1: Wake On LAN
If you have installed a network adapter (LAN adapter), you can
use the cable provided with the card to plug into the WOL con-
nector on the mainboard. This is the Wake On LAN feature.
When your system is in a power–saving mode, any traffic
through the network automatically resumes the system. You
must enable this item using the Power Management page of the
Setup Utility. See Chapter 3 for more information.
36