Table of Contents
Advertisement
Service code
Function 45 Service code is used to delete some or all of your changes to the factory settings. This function enables you
to partially or fully reconfigure your device. It is especially helpful if you have modified settings but find that your fax
machine does not respond as expected.
Only use this function when absolutely necessary. If you are satisfied with your
changes to the factory settings you should not use this function.
After deleting some or all of your custom settings please rerun EASY INSTALL.
The following codes are at your disposal:
Code No. 7117
This code erases all your modifications to the factory settings. The fax machine will therefore react in exactly the same
way as on first installation.
Code No. 7140
When you enter this code, all your entered settings and data will be erased, except for:
Example for using a service code:
1
2
3
4
5
6
OK
Select function 45.
7
8
9
FUNCTION
∗
0
#
OK
Press the OK key.
FUNCTION
1
2
3
4
5
6
Enter a code.
7
8
9
∗
0
#
OK
Press the OK key.
FUNCTION
With CURSOR LEFT/CURSOR RIGHT you can select whether you
OK
really want to delete your settings. Confirm with OK. Your fax machine
FUNCTION
will be reset to its original configuration.
)
*
only for fax machines with built-in answering device
• your personal outgoing message in your answering device *
)
• received messages *
• stored short dial numbers
• stored telephone book numbers
• your name
• your telephone number
– 52 –
)
Advertisement
Table of Contents
