Service; Changing The Toner Cartridge - Philips LASERFAX 920 User Manual

9 Service

Changing the Toner Cartridge

Original Consumable Materials
Use only original consumable materials. These are
EN
available from a specialised retailer or through our or-
der service (see back side of this user manual). Other
consumable materials can cause damage to the device.
Instructions on the Packaging
Follow the instructions on the packaging of the con-
sumable materials.
Plug'n'Print Card
Before you can receive documents, make copies, or print,
a toner cartridge must be inserted into the device. For this
reason, a starter cartridge is supplied with the device. The
toner level memory for this starter cartridge was set at the
factory. The starter cartridge need not be updated with a
Plug'n'Print card. For each additional toner cartridge that
you insert into your device, you must update the toner lev-
el memory with the Plug'n'Print card provided.
1 Open the cover by taking hold of both document
guides and tipping the cover backward.
2 Remove the old toner cartridge, by gripping it at the re-
cess in the middle and pulling it upward.
Carefully remove the toner cartridge from the de-
vice so that no toner dust spills out. Take care
where you place the toner cartridge, escaping ton-
er dust may soil the surface.
Store opened or used toner cartridges in their
original packing or in a plastic bag in order to pre-
vent toner dust from escaping. Dispose of old
toner cartridges by turning them in at specialised
shops or at a waste collection site. Never dispose
of toner cartridges by throwing them into fire.
Toner cartridges should never be allowed into the
hands of children.
30
Never open a toner cartridge. If toner dust is re-
leased into the air, you should avoid allowing it to
contact your skin and eyes. Do not inhale the re-
leased toner dust. Remove the toner dust from
clothing or objects with cold water; hot water
would only cause the toner to set.
3 Take the new toner cartridge from the package.
4 Remove the black protective foil and other packaging
material, but do not yet remove the protective
strip from the cartridge.
5 Shake the new toner cartridge back and forth several
times in order to distribute the toner evenly, thereby
improving the print quality.
6 Only after completely pull off the protection strip lo-
cated on the left side of the cartridge.
Once you have removed the protection strip, do
not shake the toner cartridge any more. Other-
wise, it is possible that toner dust will be released
into the air.
7 Place the toner cartridge into your device. The cartridge
should snap securely into position.
8 Close the cover. Make sure that the cover snaps securely
into position on both sides.
9 NEW CARTRIDGE? appears on the display. Confirm
with OK.
Philips LPF 920 · 925 · 935 · 940