Philips Fax Machine User Manaul page 13

1. Carefully remove the fixing strips
from the new ink film. The ink film
must not be damaged.
6. Close the ink film cover by folding it forwards. Make
sure that both release levers are engaged.
Loading the new ink film
3
2. Hold the ink film so that the large
roll is underneath and the blue
gear wheel of the small roll is on
the right. Lay the ink film in the
rear ink film compartment by
pressing the right-hand blue end
of the large roll against the blue
spring shaft.
3. Then fit the left-hand black end of
the large roll on to the left-hand
shaft.
7. Then close the operation panel.
– 11 –
4
2
5
4. Now take the small roll and lay it in
the grooves provided in the front
ink film compartment.
5. Turn the gearwheel of the small
roll back to tension it. Make sure
that the film is not creased.
A silver strip is fixed to the start of the ink film, so
the quality of the first few pages may be impaired.