Table of Contents
Advertisement
You can now enter more commands or you can replace the receiver to end remote access.
Below you will find a table showing all functions which can be carried out remotely.
Make a note of your code by incorporating it in a longer number, for example, so that it cannot be recognised by other
people. If you wish to change your code, repeat the above procedure and enter a new code.
To switch the remote access function off again, enter 0000 as 4 digit code. Ensure that the access code (function 52) is not
the same as the VIP code (function 53) for your answering device. If you try to enter the same code, the message CODE
NOT OK appears in the display. You must then select another code.
Function
REPLAY INCOMING MESSAGE
PLAY
SKIP FORWARD
RECORD OUTGOING MESSAGE
PLAY OUTGOING MESSAGE
DELETE INCOMING MESSAGE
DELETE ALL MESSAGES
DAY-MODE
STOP
NIGHT-MODE
FUNCTIONS
Repeat current message
1
Play
2
Skip forward
3
Record outgoing messages
4
Play outgoing message
5
STOP
8
Key
Description
1
The message you are just listening to will be repeated.
2
Your messages will be played back.
3
Move to next message.
4
After pressing key
4
again. You will hear a long confirmation tone. Now speak your new
outgoing message. After you have finished, press key
new outgoing message will now be played back. Afterwards you will hear
a long confirmation tone.
5
Pressing key
6
You can delete the message you are listening to by pressing key
You will hear two confirmation tones. You must press key
five seconds to execute the delete command.
6
You can also delete all messages at once. Press key
listening to a message. You will hear two confirmation tones. You must
press key
command.
7
You can set your fax machine to DAY mode by pressing key
hear a long confirmation tone. TIMER mode is deactivated by this
command.
8
The current command is interrupted.
9
You can set your fax machine to NIGHT mode by pressing key
will hear a long confirmation tone. TIMER mode is deactivated by this
command.
Delete message:
6
Current message
ee
Press
➧
6
e
Press
➧
, deleted
6
All messages
Press
➧
ee
6
Press
➧
, deleted
e
6
DAY-Mode:
7
Press
➧
e
, (DAY-Mode activated)
7
NIGHT-Mode:
9
Press
➧
, (NIGHT-Mode activated))
e
9
4
, you will hear two confirmation tones. Press key
5
you can hear your current outgoing message.
6
again within 5 seconds in order to execute the delete
Remote access:
Enter telephone number
Wait for outgoing message
Enter access code
e
Listen to new
ee
messages
e
Enter function
– 45 –
4
again. Your
6
.
6
again within
6
, if you are not
7
. You will
9
. You
1
2
3
4
5
6
7
8
9
0
X
X
X
X
1
2
3
4
5
6
7
8
9
0
Advertisement
Table of Contents
