Table of Contents
Advertisement
Configuring/checking DAY mode
1
2
3
4
5
6
OK
Enter function 31.
7
8
9
FUNCTION
∗
0
#
OK
Press the OK key.
FUNCTION
With the CURSOR LEFT and CURSOR RIGHT keys you can now
choose between the above mentioned settings.
OK
To confirm press the OK key.
FUNCTION
For units with a built-in answering device the following message also appears:
You can select one of the automatic answering device modes
described above with the CURSOR LEFT/CURSOR RIGHT keys.
OK
To confirm your settings, press the OK key.
FUNCTION
You can receive a telephone call on the additional telephone even after the built-in answering device has already been
activated. If you have a serial connection, the built-in answering device is automatically switched off after lifting the
handset of the other telephone. If your connection is parallel, you can switch off your outgoing message by pressing the
∗
key twice.
Your answering device will be activated automatically after a large number of rings.
In the case of a phone call, your answering device is activated automatically after the
5th ringing signal. After the first message left by a caller, the answering device of your
machine is automatically reduced to 2 rings. After you have listened to your
messages, the next incoming call will again automatically activate the answering
device after 5 rings.
You are able to check remotely whether new messages have been left on your
answering device (if your answering device activates after 2 rings you know right
away that new messages have been left). This configuration is especially
advantageous when you are e.g. on holiday or on a business trip.
Your answering device is switched off.
– 23 –
Advertisement
Table of Contents
