Table of Contents
Advertisement
Service code
Function 45 Service code is used to delete some or all of your changes to the factory settings. This function enables
you to partially or fully reconfigure your machine. It is especially helpful if you have modified settings but find that your fax
machine does not respond as expected.
Only use this function when absolutely necessary. If you are satisfied with your changes
to the factory settings you should not use this function.
After deleting some or all of your custom settings please rerun an Easy Install.
The following codes are available to you:
Code No. 7117—This code erases all your modifications to the factory settings. The fax machine will therefore react in
exactly the same way as on first installation.
Code No. 7140—When you enter this code, all your entered settings and data will be erased, except for:
Example for using a service code:
1
2
3
4
5
6
OK
Select function 45.
7
8
9
FUNCTION
∗
0
#
OK
Press the OK key.
FUNCTION
1
2
3
4
5
6
Enter a code.
7
8
9
∗
0
#
OK
Press the OK key.
FUNCTION
With CURSOR LEFT/CURSOR RIGHT you can select whether you
OK
really want to delete your settings. Confirm with OK. Your fax
FUNCTION
machine will be reset to its original configuration.
Care and maintenance instructions
The scanner glass and rollers of your fax machine should be cleaned of paper dust and scuff when necessary.
Before opening the fax machine, make sure that you are electrically discharged by e.g.
touching the metal housing of a grounded appliance, a water pipe or radiator.
Use a soft, fluff-free cloth lightly moistened with a little alcohol (96%). You can also use a
special cloth for cleaning fax machines, which is available on the market. Do not allow
any moisture to penetrate inside the machine.
• stored short dial numbers
• stored telephone book numbers
• your name
• your telephone number
– 36 –
Advertisement
Table of Contents
