Step 11: Back up System Information
We recommend you to back up the system information using the Off-line Maintenance Utility after
setting up the system.
With backup for system information, the information and settings that are specific to your server can
be restored after the server is repaired. Follow the steps below to make a backup copy of the system
information:
1.
Prepare a 3.5-inch floppy disk.
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive and reboot the system.
NEC EXPRESSBUILDER is activated and [Boot selection] menu is displayed.
3.
Select [Tool menu]
4.
Select [English].
5.
Select [Maintenance Utility].
6.
Select [System Information Management].
7.
Insert a floppy disk into the floppy disk drive.
8.
Select [Save].
The setup is now completed.
ESX Setup 4-51