Table of Contents
Advertisement
5.
Press Esc key, then go back to Server menu, and move the cursor onto [Exit].
The Exit menu appears.
6.
Move the cursor key onto
[Exit Saving Changes] and
Press Enter.
The Setup confirmation
window appears.
7.
Select [Yes] and press Enter.
Save the setting and quit the SETUP, and then reboot.
TIPS:
When installing ESX, once power off the server for preparation of installation.
To continue with the setup procedure, proceed to "Step 5: Set HBA configuration by
QLogic BIOS" on the next page if the FC card is enabled, and to "Step 6: Install
VMware ESX 4.0 Update2" if the internal disk is enabled.
ESX Setup 4-19
Advertisement
Table of Contents
Troubleshooting
