NEC N8800-164F User Manual page 76

4-28 ESX Setup
State
Initialize the disks in your system as follows:
CAUTION:
Initializing a disk destroys all existing data on the disk.
Select Initialize of the slot with an error mark or a caution mark to set to check mark
( ) status which indicates that the pair of disks is initialized and is in mirroring
status. Or click Initialize All to start initializing and mirroring all matched pairs of disks
at one time.
If any mirrored pair is missing a disk, or if you inserted a disk in the wrong slot, you can
insert or move the disk and click Rescan to update the disk table.
When you are finished initializing disks, click Next to continue
5. When prompted, remove the ftSSS DVD from the DVD drive and insert the VMware
ESX4.0 Update2 installation DVD. The VMware ESX installer begins to load.
After the ESX installer loads, click Next.
6. On the Welcome to the ESX Installer
page, click Next to start the installation
questionnaire.
Table1．Internal Disk States
Description
Disks in this slot are initialized and mirrored
One or both disks in this slot are initialized, but not
mirrored.
Disks in this slot need to be initialized.