NEC ESMPRO Agent
NEC ESMPRO Agent is a utility to monitor the operating status, the configuration information, the
failure occurrence status of hardware and software on the NEC Express5800/ft series. When it
detects some problems, it sends messages to the computer in which the NEC ESMPRO Manager is
installed.
NEC ESMPRO Agent is required to be installed by users. For the installation procedures, see the
Installation Guide (/doc/esmsa_inst_e.pdf) and Installation Guide for ft server
(/doc/esmsa_ft-inst_e.pdf)included in the CD-ROM of "NEC ESMPRO Agent for VMware".
In order for NEC ESMPRO Agent to operate, it is necessary to configure the settings according to
your environment. See the User's Guide (/doc/esmsa_users_e.pdf) included in the CD-ROM of
"NEC ESMPRO Agent for VMware".
IMPORTANT:
Make sure that NEC ESMPRO Agent is installed because it is indispensable for
continuous operation of NEC Express5800/ft series.
Operation Environment
NEC ESMPRO Agent can be operated in the hardware and software environments shown below.
Hardware
Installation system
NEC Express5800/ft series
Software
NEC ESMPRO Agent for VMware
Procedures after Completion of Installation 5-3