4-38 ESX Setup
Step8 Set Dual Disk Configuration
At this point, CPU/IO module1-Slot1 and CPU/IO module 0-Slot1 have been duplex.
Except when a disk has been added or RAID has been reconfigured, check if the
duplication has succeeded and perform "Creating and Mounting File System"
NEC Express5800/ft series secures data integrity by setting dual disk configuration using
"Software-RAID". The section describes procedures to configure disks.
IMPORTANT:
Execute Disk settings and configure dual disk when a new hard drive is added.
Disk Configuration
RAID must be configured for all the internal disks in NEC Express5800/ft series.
As shown on the chart1, the internal disks redundancy is configured by software RAID with the
internal disks of corresponding slots.
<確認したいこと
The internal disks path and device name
Slot 1
Slot 0
Slot 2
Slot 0
Slot 2
Slot 1
Slot 3
Slot 5
Slot 4
Slot 4
Slot 3
Slot 5
Slot 7
Slot 6
Slot 6
Slot 7