NEC N8800-164F User Manual page 36

3-8 Installing Server
6. Remove the system Backplane
from the 4U chassis.
7. Insert the 4U chassis from the front
side of the rack.
8. Tentatively fasten the plate screws
attached to the device to the 4 places
at the top and the bottom on front,
and back sides (total: 8) from the rear.
9. Fasten tightly the pan-head screws
attached to the device to each 2 places,
right and left (total 4) from the front.
System backplane
Panhead screws
Screws
Plate screws
Plate screws