Table of Contents
Advertisement
ii
About This User's Guide
This User's Guide helps a user to properly setup and use the product. Consult this guide when you
set up the product.
Keep this manual and the separate volume of User's Guide handy.
This User's Guide is intended for users who have a good knowledge on the basic use of VMware
ESX and general I/O devices such as a keyboard and mouse.
How to Use This User's Guide
This guide explains the procedures you should perform before you begin system operation after you
purchased the product. Read the guide in order from Chapter 1. If you perform procedures
according to this guide, you will set up the product properly.
Chapter 4 describes how to install the ESX. Chapter 5 describes post-installation procedures.
Chapter 6 explains how to troubleshoot if you cannot set up the product properly. Refer to
"SYSTEM REPAIR" on page 6-2 for details about system configurations and repairs of this product.
Refer to "TROUBLESHOOTING" on page 6-3 if you feel you failed to set up the product.
See this User's Guide for details of this product's operation, and functions and operations of the
hardware and the system.
Additional Symbols
The following symbols are used throughout this User's Guide in addition to the caution symbols
described at the beginning.
IMPORTANT:
CHECK:
TIPS:
About our Web Service
Information on NEC Express5800/ft series including modification modules is also available on our
web site, NEC Global Site:
http://www.nec.com/
Important points or instructions to keep in mind when using the server or
software
Something you need to make sure when using the server or software
Helpful information, something useful to know
Advertisement
Table of Contents
Troubleshooting
