Step 5: Set Hba Configuration By Using Qlogic Bios - NEC N8800-164F User Manual

4-20 ESX Setup

Step 5: Set HBA configuration by using QLogic BIOS

IMPORTANT:
Before setting the HBA configuration by using QLogic BIOS, it is required to complete the
storage settings such as creating a logical disk.
1. Start from the CPU/IO module 0, and then perform the following.
1.1 In the QLogic prompt window which appears during POST, press CTRL + Q or ALT +
Q.
1.2 Select "Configuration Settings", and then press Enter.