Step 4: Invalidate Os Boot Monitoring Function - NEC N8800-164F User Manual

Step 4: Invalidate OS Boot Monitoring Function

Configure this to confirm the power is on and to process appropriately the setup later.
The NEC Express5800/ft series has a monitoring function at start up.
Invalidate the monitoring function when installing.
If you do not invalidate the function, you will not be able to complete the installation correctly.
Follow the procedure described here to setup correctly.
Important:
If you do not process the setting described here, you cannot complete the setup
correctly because the server forcibly reboot while displaying the OS setup screen. The
server may repeat the setup inappropriately after forcibly rebooted. If the setup fails,
you will not be able to use the server until you perform reinstallation from the
beginning.
1.
Press Esc key to back to Advanced menu, and then move the cursor onto [Server] and select
[Server].
The Server menu appears.
ESX Setup 4-17