NEC N8800-164F User Manual page 78

4-30 ESX Setup
10. Click Next after the completion of
loading.
11. On the License page, click Enter a
serial number now, then specify a
serial number.
Before leaving the License page,
ensure that only the left embedded
Ethernet port (labeled port 1) in the
upper CPU/IO module has an active
network connection.
Disconnect the network cables from
all other Ethernet ports in the system
Click Next to continue.
12. On the Network Configuration page,
click the Network Adapter
drop-down list and select the network
adapter that is marked with a green
check mark. Then, click Next to
continue