Table of Contents
Advertisement
4-26 ESX Setup
1.13
Select "Exit Fast!UTIL", and then press Enter.
1.14
Select "Reboot", and the press Enter to reboot the system.
2.
The settings for the CPU/IO module 0 are complete. Next, start from the CPU/IO module 1,
and then perform steps 1.1 to 1.14 again.
CHECK:
The images shown in 1.9-1.11 are examples. The information displayed varies
depending on the product name of external storage and settings such as logical
disk settings.
Advertisement
Table of Contents
Troubleshooting
