NEC N8800-164F User Manual page 32

3-4 Installing Server
Installing the device to the rack (N8140-74/92/93/94/98/99)
Install this device to the rack.
Installing the device to our company's racks (N8140-74/92/93/94/98/99) or to other company's
racks is explained in this section.
Observe the following precautions to use the server safely.
There is a risk of a death or serious injury. For details, see "Notes for Safe
Handling" in Chapter 1.
Do not use the product with the unspecified rack.
Do not use the product at non-designated places.
Observe the following precautions to use the server safely.
There is a risk of a burn, personal injury, or damage to physical assets.
For details, see "Notes for Safe Handling" in Chapter 1.
Remove all CPU/IO modules before moving the rack.
Do not assemble or disassemble parts alone.
Do not install the server with the cover removed.
Do not squeeze your fingers in the product.
IMPORTANT:
Temperature increase inside the rack and airflow
If you install several components or the ventilation isn't good inside the rack, the internal
temperature may increase due to heat emitted from the components. When the operating
temperatures of NEC Express5800/ft series (10 to 35°C) are exceeded, there is a risk of
malfunction. You must take adequate precautions and measures for airflow inside the rack as well
as in the room so that the internal temperature can be kept within this range during operation.
Required tool
●
To install the device to the rack, a Phillips-head screw drive is required.
WARNING
CAUTION