NEC N8800-164F User Manual page 80

4-32 ESX Setup
16. On the Datastore page, do one of the
following;
o If you are installing the system
software onto a blank disk, click
Create new datastore. Then,
enable the check box for Create on
the same device as ESX to create a
datastore using any disk space that
remains on the disk after creating
the system software partitions.
Optionally, specify a name for the
datastore, or keep the default of
Storage1.
o If you are installing over a previous installation on this disk, and you want to preserve the
existing datastore partition from that installation, click Use existing datastore and select
the partition that contains the datastore.
When you are finished specifying a datastore, click Next to continue.
17. On the Service Console Virtual
Disk Image page, if necessary,
customize the default partitions that
the installer will create on the
installation volume. Otherwise, click
Next to accept the default partitions.
Basically, default setting is
recommended. Ensure that your
partition settings meet or exceed the
default recommendations, which are
required for normal operations.
18. On the Time Zone Settings page,
select the time zone for your location
and click Next.