Step 9: Set Dual Disk Configuration - NEC Express5800/R320a-E4 User Manual

Step 9: Set Dual Disk Configuration

NEC Express5800/ft series secures data by setting dual disk configuration using "RDR (Rapid Disk
Resync) function." Be sure to make dual disk settings by referring to the procedure.
IMPORTANT:
Set dual disk configuration by the RDR (Rapid Disk Resync) function. If you want to
use other disk management tool (e.g. VERITAS Storage Foundation), install it after
"Step 13: Make Settings for Failure Management."
CPU/IO module has a processor function part and IO function part, and monitors and
manages each part. The IO function part is referred to as PCI module in this section.
HDDs mounted to built-in slots need to be duplexed. Refer to "Setting Dual
DiskConfiguration by RDR (Rapid Disk Resync) function" and duplex the HDDs in
each slot.
Windows Setup 4-61