4-12 ESX Server Setup
Step 4: Invalidate OS Boot Monitoring Function
Perform the following operation further to the setting to validate FC card in "Step 3 Validate FC
card".
Configure this to confirm the power is on and to process appropriately the setup later
The NEC Express5800/ft series has a monitoring function at start up.
Invalidate the monitoring function when installing.
If you do not invalidate the function, you will not be able to complete the installation correctly.
Follow the procedure described here to setup correctly..
Important:
If you do not process the setting described here, you cannot complete
the setup correctly because the server forcibly reboot while displaying
the OS setup screen. The server may repeat the setup inappropriately
after forcibly rebooted. If the setup fails, you will not be able to use the
server till you perform reinstallation from the beginning.
1.
Press Esc key to back to Advanced menu, and then move the cursor onto [Server] and select
[Server].
The Server menu appears..