Types Of Reports And Lists; Reports - Konica Minolta BIZHUB C250 Operations

E x p la n a tio n o f r e p o r ts a n d lis ts
12 Explanation of reports and lists
12.1

Types of reports and lists

The following types of reports and lists can be printed with the this machine.

Reports

Reports consist of those that are printed out automatically, those for which
the printing method can be set, and those that are printed out as necessary.
Name of report
Activity report
TX report
Polling TX report
Polling RX report
Broadcast report
Sequence polling reception
report
Reservation communica-
tion report
Reservation polling TX re-
port
Broadcast reserved report
bizhub C250 (Phase3)
Explanation
This report contains a record of transmissions and receptions.
Communications for a total of 100 transmissions and receptions
are recorded on separate pages for transmission and reception.
In addition, the transmission record, the reception record or a
record of both can be printed as necessary.
• The Utility Mode sets communications report printing to OFF
Daily, Every 100 Comm. or 100/Daily
• The following reports can be selected and printed on the Com-
munication List screen. [Job List] - [Fax TX] tab - [Job History]
- [Comm. Setting])
• Activity Report, TX Report, RX Report
The transmission result is printed automatically. The Utility Mode
sets transmission reports printing to always, during an ON / If TX
Fails / OFF.
If the TX Report is set to ON or If TX Fails in the Administrator Set-
ting of the Utility Mode, the result of the polling transmission is
printed out automatically.
If the TX Report is set to ON or If TX Fails in the Administrator Set-
ting of the Utility Mode, the result of the polling reception is print-
ed out automatically.
When the Sequential TX Report is set to ON in the Administrator
Setting of the Utility Mode, printing is made automatically after
completion of the sequential broadcast transmission.
If the Sequential TX Report is set to ON in the Administrator Set-
ting of the Utility Mode, the result of polling to multiple destina-
tions is printed out automatically.
If the Timer Reservation TX Report is set to ON in the Administra-
tor Setting of the Utility Mode, this report is printed out automat-
ically when a transmission is reserved.
If the Timer Reservation TX Report is set to ON in the Administra-
tor Setting of the Utility Mode, this report is printed out automat-
ically when a polling transmission has been reserved.
If the Timer Reservation TX Report is set to ON in the Administra-
tor Setting of the Utility Mode, this report is printed out automat-
ically when a sequential multi-station transmission has been
reserved.
12
*
,
*
.
12-3