Broadcast Report - Konica Minolta BIZHUB C250 Operations

12
12.6

Broadcast report

This report is printed out automatically at completion of a sequential multi-
station transmission.
Automatic printout can be set to [ON] or [OFF] with [Sequential TX Report] at
[Report Settings] of Utility Mode. And report output timing (All Dest./1 Dest.
at a time) can be specified in the [Broadcast Result Report]. For details, see
"Report settings" on page 11-70.
*
The actual reports may be different from the reports in this manual.
Item
Destination:
Start time:
Time:
Prints:
12-16
Description
The following is shown.
• A destination name is shown when it is registered in the Address
Book list.
• Destination telephone number
The time at which communication started is shown.
The required time for the communication is shown.
The number of pages transmitted is shown. The number of pages able
to be transmitted and the total number of pages are shown in the form
of a fraction.
Explanation of reports and lists
bizhub C250 (Phase3)