Konica Minolta BIZHUB C250 Operations page 262

10
Registering the program
The procedure for registering the Program is as follows.
1
See "Displaying the fax registration screen" on page 10-3, to display
the Fax Registration screen.
2
Press [Program].
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of
[Program], enter the "3" on the keypad.
3
Select the Program you want to register and then press [Edit].
– Display of [Scan Setting] and [Comm. Setting]
– Setting Value:ONOFF
– Display:* -
– If you press
change the page to display. 15 every destination per page of
destination are displayed.
– If you press [Page List], you can specify the display of a Program
list per page.
10-26
Not registered
(Space)
or in the left-hand side of [Page List], you can
Registering/Settings
bizhub C250 (Phase3)