Multi Lines Setting - Konica Minolta BIZHUB C250 Operations

11

Multi Lines Setting

Administrator Setting >> Fax Setting >>Multi Lines Setting
Set the items required for the additional line. (page 11-74)
These items can be set only when the Fax Multi Line is installed.
Item
Telephone Line Set-
ting
Function Setting
Multi Lines Setting
Sender Fax No.
11-14
Description
Dialing Method Set the dialing method for
the Line 2 (additional line).
Number of RX Call Set the arrival frequency for
Rings the Line 2 (additional line).
Set the pseudo ring back
tone frequency after the ar-
rival until receiving is start-
ed.
Line Monitor Sound To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON.
PC-FAX TX Setting Set the line for the PC-FAX
transmission.
Line 2 Setting Set the communication
method for the Line (addi-
tional line).
The Fax ID for the Line 2
(additional line) is printed
on the document received
by the other party as a
sender information.
Utility mode
Available value
*
PB / 10pps
*
0-15 (2 times )
*
ON / OFF
*
No Selection /
Line 1 / Line 2
*
TX and RX / RX
Only / TX Only
Up to 20 charac-
ters with 0 to 9, +,
space, * and #
used.
bizhub C250 (Phase3)